Desafíos que pueda tener una construcción de Skatepark

Challenges that a Skatepark construction may have

Park skateboarding styles are in some ways the trending genre of the same sport, as vertical skating has innovated as a heterogeneous and more accessible skating style. However, its name is due to the variety of obstacles built within the skate park.

Although, a skater park is a skating rink, but with more obstacles, unevenness, forts, ramps, the badly called bowls that are the concave ramps and any other element that helps the skater You can perform your stunts. These courts have complex shapes, which can be designed to represent a construction challenge.

These parks are usually built with obstacles on the street, even the best skate parks are said to have structures similar to transitional, vertical and street skating. This fusion of 3 skating styles is part of fields or exclusive skating parks, becoming exciting contests or competitions like the 2020 Olympic Games were. strong>.

This article shows you the museum of errors when building a Skatepark. Well, the ignorance about skateboarding, the lack of long-term vision and the desire to get rid of a project instead of believing in it... They are the selection of bad technical solutions that are not exceptions, but unfortunately, common failures in multiple skateparks.

Desafíos que pueda tener una construcción de Skatepark

Errors in the construction of a Skatepark

Transition between the ground and an inclined plane: A detail of builders who have never set foot on a skateboard, a main and repeated problem in various structures where the “skatable” element is not incorporated. It is there, where while the ascent passes without obstacles, it is on the descent when the wheels are blocked by the step, causing a sudden fall.

Another problem of transition between the inclined plane and the ground is when the builder uses a sheet of metal which he calls "plate" and in his "concern" so that it does not come loose or rise, they bend it. This fact causes a sudden braking, making the inclined plane an unusable obstacle.

The Flat Rail: It is a classic that many of the Spanish skateparks go through. Well, the double tube may seem harmless, but, nevertheless, it is a real trap for shins and ankles. Causing the skater to put his leg between the two tubes during an acrobatic and break it by his own weight and inertia.

The protruding plate: This is perhaps the most common mistake made by skatepark builders. Since the skater reaches the speed to go up the inclined plane, but stops momentarily at the bottom of the module or ramp because his wheel collides with the plate . This situation is to blame for falls that turn out to be the reason for multiple injuries, wrist fractures and others.

Likewise, another very widespread real danger is badly screwed screws and their protruding heads. Well, even in these cases, a poorly adjusted screw could cause a catastrophic accident, since it blocks the wheels of the skateboard.

Place modules anywhere: Typical example that demonstrates the lack of knowledge of said sport. The modules or ramps must be located at a safe distancefrom any object or obstacle located inside or outside the court.

Imagine for a second that you are skateboarding and you reach the reception of an obstacle on the incline, with a correct speed but enough to crash into a bank that is randomly placed almost a meter away from the ramp... Clearly it would be enough of an accident to break a part of your body.

The Cooping: They are named for the metal tubes on which the skaters slide, usually this tube goes to the beginning off a ramp straight as a curb or around a curve. By placing said tube in a very protruding or very curved way, it can cause the "grinds" (trick that consists of jumping with the board and climbing over a curb or railing), to be extremely dangerous.

Grinding rail or grind rail: A rail is not only “an iron bar lying on the ground”, it is an object used by skaters to perform skateboard tricks such as grinding (a trick that involves sliding the body, rather than rolling the wheels of the skate against the supporting surface).

Said bar or rail is usually square or round and must be adjusted so that the use does not bend it, the bends or dents of the ramp can cause the board to jam or jump inappropriately.

Where to implement a Skatepark?

The location of a skatepark is as important as its design and construction, since a successful park is the best way to attract successful skaters and photographers. All this will help the skatepark get views in magazines, media and media recognition of the city in which it is housed.

Visibility: This helps non-practitioners understand this sport, apart from the fact that its central location would benefit many of its skaters. It should be noted that it would also be more frequented and action-packed during the day compared to the classic park in any city.

The Zones: the skatepark should be like a public square where its practitioners exhibit their respective skills and meet even on days when they don't really want to skate. A central, pleasant location with adjacent amenities for both spectators and practitioners.

Easy access: A secluded skatepark, but well connected by public transport is a quite acceptable alternative. However, the idea is not to lose sight of it, since most of the skaters attend it skating or on foot.

Interaction with spectators: The park must be municipal and not exclusive at all, even if its “sports” elements are not used by skaters. The goal of a skatepark is to rely on diversity and acceptance, it is to go beyond “just skaters”.

Leave a Comment

Your email address will not be published. Required fields are marked *

en_USEN